淘工作

服务热线18562255186
磁致伸缩位移传感器行业应用
  • 隧道掘进

    隧道掘进

    在盾构机推进系统的每组油缸,都配备有磁致伸缩位移传感器,用于测量油缸推进时的位移数据。

    煤矿用掘进设备机身及机身运动机构检测传感器由截割臂仰角测量用的升降油缸内置磁致伸縮位移传感器、截割臂回转用磁栅编码器、机身仰角传感器、铲板倾角传感器组成,逻辑运算和控制系统通过安装在机身上的各个传感器得到掘进机的位姿信号,通过几何运算后结合机身定位系统的位置信息对掘进机的位姿。


  • 建材机械

    建材机械

           位移传感器在智能化机械设备中主要用于位移测量与位置定位,也可以通过在线监测指示程度,特殊机械设备中的振动、涨差或者偏心性能监测,可在设备出现异常状况时提前预警并传输给控制系统做出相应的关联操作。

  • 汽车制造

    汽车制造

    把磁致伸缩位移传感器引入到汽车悬架系统中的减震器中,利用磁致伸缩位移传感器实现对减震器震动幅度进行实时检测。

    从而可以有效减小汽车车身的震动,提高汽车的乘坐舒适性和驾驶平顺性。

    另外,汽车零部件行业从最初的冲压到焊接、涂装、锻造和铸造再到总装,我们的磁致伸缩传感器都可以帮助您可靠检测零部件和控制过程

  • 冶金制造

    冶金制造

    ZAIDONGTAIGUNFENGDIAOZHENGZHUANGZHIZHONG,HEXINYUANJIANWEINEIZHIZAIYEYAGANGNEIDECIZHISHENSUOWEIYICHUANGANQI,JIANGCIZHISHENSUOWEIYICHUANGANQIYINGYONGYULIANZHUDONGTAIQINGYAXIAGONGWEI,SHIYONGSSISHUZILIANGCHUANGANQI,QIFENBIANLVDADAO0.5WEIMI,NENGGOUJINGQUEFANKUIDANGQIANDEGUNFENGWEIZHI,JIANGWEIYILIANGCHUANSONGZHIPLCJINXINGCHULI,SHANGWEIJIJUCIDIAOJIEYEYAGANGDEYAXIALIANG,XINGCHENGWANZHENGDEBIHUANKONGZHI,BAOZHENGLEJIAOZHUXIAOGUO。

  • 数控机床

    数控机床

    位移传感器在数控机床上主要是用来检测数控机床床移动的直线位移量或者角度位移量。

    不同种类数控机床对传感器的要求也不尽相同,一般来说,大型机床要求速度响应高,中型和高精度数控机床以要求精度为主。

    推荐使用NADO拿度SSI输出位移传感器,抗干扰性强和可靠性高,精度高和响应速度快;并且使用维护方便,适合机床运行环境且成本低。

  • 硫化机

    硫化机

           液压硫化机因为位移传感器测量反馈,精度高,控制效果好,自动化程度高,在汽车轮胎行业已基本替代传统的机械式硫化机。

          液压式硫化机装胎机构和中心机构上环的高度可通过油缸内置磁致伸缩传感器高精度测量控制,对于硫化不同规格轮胎很有意义;磁致伸缩位移传感器方便与控制系统连接使用,可通过位移传感器单独对每个模腔进行合模距离控制,独立工作。


  • 注塑机械

    注塑机械

    应用:为注塑机的注射、锁模和顶出行程控制提供位置反馈。
    好处:响应时间快速,减低周期时间。
             坚固防震(尤其对顶出时产生的震荡),没有磨损,无须定期重标和维护
             持久耐用,磁致伸缩位移传感器可使用多年依然准确。

  • 风电机组

    风电机组

    应用:为风力发电系统测量风速、风向等参数的精确数值。
    好处:响应时间快速,减低周期时间。
             坚固防震(尤其对顶出时产生的震荡),没有磨损,无须定期重标和维护
             持久耐用,对于高速顶出时如使用电位尺三至六个月便要更换,拿度磁致
             伸缩位移传感器可使用多年依然准确。

  • 煤矿设备

    煤矿设备

           煤矿推移千斤顶专用磁致伸缩位移传感器,位移传感器应用于PLC控制同步顶升系统,可根据液压千斤顶的构造与行程,选择内置安装型磁致伸缩位移传感器,或者外置安装型直线位移传感器。
    好处:重复精度高,保证定位精准。持久耐用,原用电位尺配干管接触器有寿命,
    而磁尺非接触式,寿命更长。

  • 液压伺服

    液压伺服

    位移传感器在传统液压上升为伺服液压时,进行位置测量与反馈。

    磁致传感器重复精度高,保持产品一致性,减少废品。响应速度快,测量准确,使生产过程更易控制。推荐使用NADO拿度TD型分体式磁致伸缩位移传感器,内外管分离,维护更加方便。

激光测距仪行业应用
  • AE0112 切割应用

    AE0112 切割应用

    In the metal industry, devices for length division are frequently used. However, many standard solutions, which are available on the market, are not optimal for some companies. With Dimetix laser distance sensors, an economical special model can be offered.
    AE0203 轨道交通基础设施的监控

    AE0203 轨道交通基础设施的监控

    Accurate distance measurement is essential in railway construction – for new development as well for maintenance. Speed trains of the latest generation move at maximum speeds of over 300km/h. In order to preserve the rolling stock at such strains, millimeter precise measuring is inevitable.
    AE0505 自动测量直径和宽度

    AE0505 自动测量直径和宽度

    An exact measurement is extremely important when positioning and dimensioning paper rolls. The Dimetix laser distance sensors measure the width of the paper roll using two sensors on each side of the paper roll.
  • AE0104 防洪闸门方位监测

    AE0104 防洪闸门方位监测

    In this plant, Dimetix laser distance sensors are used to monitor floodgates. This means that the amount of water outflow is known at all times. The sensors measure the exact position of the floodgates in millimeter-precision and absolutely contactless.
    AE0202 隧道挖掘的横截面检测

    AE0202 隧道挖掘的横截面检测

    An automatic monitoring system was used in a headwater pressure tunnel to measure the passive bias of penstocks during injections. As soon as the limit values were exceeded, an alarm lamp illuminated, so that the injections could be stopped.
    AE0203 轨道交通基础设施的监控

    AE0203 轨道交通基础设施的监控

    Accurate distance measurement is essential in railway construction – for new development as well for maintenance. Speed trains of the latest generation move at maximum speeds of over 300km/h. In order to preserve the rolling stock at such strains, millimeter precise measuring is inevitable.
    AE0205 监控铁路轨道上方的岩层

    AE0205 监控铁路轨道上方的岩层

    Dimetix sensors are used to monitor a debris flow activity. These rocks can lead to the accumulation of a mountain stream, which can lead to a flooding of a rail track. In addition, two additional lasers are used to monitor a large boulder that moves downhill and puts a village in danger.
    AE0207 山体滑坡/泥石流预警系统

    AE0207 山体滑坡/泥石流预警系统

    In order to move large structures as bridges and buildings, the PolyDist system is the optimal solution. With up to 4 Dimetix sensors the process of moving is constantly monitored so that the structure can be moved and repositioned precisely.
    AE0305 监控历史古建筑物的形变

    AE0305 监控历史古建筑物的形变

    In historic buildings the fabric can often be damaged. With the aid of a monitoring concept which includes Dimetix sensors, the movements of historical buildings are monitored and examined.
    AE0503 料仓料位的测量

    AE0503 料仓料位的测量

    With Dimetix laser distance sensors, the level in silos can be measured exactly and at any time. The Dimetix sensors measure on different surfaces like stones, sand, grain or dark surfaces.
    AE0505 自动测量直径和宽度

    AE0505 自动测量直径和宽度

    An exact measurement is extremely important when positioning and dimensioning paper rolls. The Dimetix laser distance sensors measure the width of the paper roll using two sensors on each side of the paper roll.
    AE0506 监控行车的移动定位

    AE0506 监控行车的移动定位

    In a steel production facility, large transfer cars transported glowing steel plates. Due to a malfunction of the micro-switches, the cars collided at the end of a transfer line. With the help of two Dimetix lasers integrated in protective housings, a smooth production could be restored.
    AE0508 船闸、水闸提升定位

    AE0508 船闸、水闸提升定位

    The ability to reliably and precisely monitor flood gate height is a challenge for hydropower and reservoir flood gate operators. Dimetix laser sensors can be used for remote monitoring of the flood gates. The sensors measure the distance to the surface of the flood gates.
    AE0510 监测桥梁结构形变

    AE0510 监测桥梁结构形变

    Dimetix helped make history in 2010 by collaborating with Applied Geomechanics, Inc. to develop a system to monitor the lift and placement of steel bridge truss sections on the Huey P. Long Bridge over the Mississippi River in New Orleans. The project involved transportation by river barge, lifting, and placement of the pre-assembled bridge truss spans to reduce stress on the bridge and minimize interruption of traffic. Ten DLS-C laser distance sensors were lifted aboard the 2,700 ton trusses and were used in conjunction with specially fabricated targets and software developed to monitor beam deflection during the day long lift.
    AE0511 建筑结构的位移监控

    AE0511 建筑结构的位移监控

    In modern urban environments, heavy construction often must be conducted immediately adjacent to neighboring properties and structures that must remain open to business or residency during excavation and construction. Traditional surveying techniques allow for +/-5 mm precision of displacement, but Dimetix laser distance sensor technology allows for measurements with sub-millimeter accuracy at distances up to 500 m to detect any shift or displacement of structures.
    AE0601 采矿设备移动定位

    AE0601 采矿设备移动定位

    In a mining application, Dimetix laser distance sensors have been used to ensure an accurate lifting and lowering process of the superstructure. In the case of a deviation, a signal was sent to the hydraulic system so that it could be corrected again.
    AE1102 钢铁液位(填充和倾倒)控制

    AE1102 钢铁液位(填充和倾倒)控制

    Dimetix sensors were installed in a foundry to monitor the filling of hot steel and iron. With the aid of the sensors the level can be measured and an overflow can be avoided.
    AE1601 大型建筑物的位移控制

    AE1601 大型建筑物的位移控制

    In Norway an early warning system was developed using 3 Dimetix sensors. These measure daily the movements of rocks above a bay. Thus, a warning can be triggered in the event of a landslide.
  • AE0401 卡车位置的测量

    AE0401 卡车位置的测量

    In times of increasing traffic and ever more demanding tasks where time is of the essence, a system was developed to speed up customs checks on HGV vehicles. This device helps to significantly reduce time consuming check ups on vehicles since the positioning of the trucks is done with sensors. Customs uses mobile X-Ray scanners to check the content of trucks and containers. During the scanning process the movement of the scanner must be determined precisely.
    AE0502 玻璃面板尺寸的测量

    AE0502 玻璃面板尺寸的测量

    In order to transport glass panels, they are positioned after production from a conveyor line onto a pallet. To prevent a glass breakage, a system with DIMETIX sensors was developed, which precisely monitors the positioning.
    AE0506 监控行车的移动定位

    AE0506 监控行车的移动定位

    In a steel production facility, large transfer cars transported glowing steel plates. Due to a malfunction of the micro-switches, the cars collided at the end of a transfer line. With the help of two Dimetix lasers integrated in protective housings, a smooth production could be restored.
    AE0507 调节锯齿的对齐

    AE0507 调节锯齿的对齐

    Large saw blades used for cutting different materials frequently shift out of alignment, resulting in cuts at the wrong angle and unnecessary reworking and scrap. A maintenance free laser distance sensor saw blade alignment system provided a reliable,repeatable, and cost effective means of improving production quality and eliminating unnecessary scrap.
    AE0508 船闸、水闸提升定位

    AE0508 船闸、水闸提升定位

    The ability to reliably and precisely monitor flood gate height is a challenge for hydropower and reservoir flood gate operators. Dimetix laser sensors can be used for remote monitoring of the flood gates. The sensors measure the distance to the surface of the flood gates.
    AE0509 切割方案的激光控制

    AE0509 切割方案的激光控制

    Increasing operational demands, maintenance requirements, and the growing importance of efficiency are factors in nearly all industries. This is relevant in the metals production industry, and especially true for the small to midsized companies at the heart of the fabrication & metalworking, where laser measurement technology provides an economical approach to reducing production delays and improving quality, as well as an affordable technological advantage helping to increase efficiency.
    AE0601 采矿设备移动定位

    AE0601 采矿设备移动定位

    In a mining application, Dimetix laser distance sensors have been used to ensure an accurate lifting and lowering process of the superstructure. In the case of a deviation, a signal was sent to the hydraulic system so that it could be corrected again.
    AE0701 木材粘合时的长度定位

    AE0701 木材粘合时的长度定位

    Spruce wood has been produced at our customers facility for decades with great care and professional competence and is not a freely interchangeable product. Because the big difference is in countless details that have been perfected over the many years. Our customer has the most modern know-how for the production of cuttings for a wide range of applications such as planking, timber construction, roof constructions, pallet production etc. Dimetix lasers are used daily. The truss length is used for positioning and to enhance their operational efficiency.
  • AE0207 山体滑坡/泥石流预警系统

    AE0207 山体滑坡/泥石流预警系统

    In order to move large structures as bridges and buildings, the PolyDist system is the optimal solution. With up to 4 Dimetix sensors the process of moving is constantly monitored so that the structure can be moved and repositioned precisely.
    AE0701 木材粘合时的长度定位

    AE0701 木材粘合时的长度定位

    Spruce wood has been produced at our customers facility for decades with great care and professional competence and is not a freely interchangeable product. Because the big difference is in countless details that have been perfected over the many years. Our customer has the most modern know-how for the production of cuttings for a wide range of applications such as planking, timber construction, roof constructions, pallet production etc. Dimetix lasers are used daily. The truss length is used for positioning and to enhance their operational efficiency.
  • AE0503 料仓料位的测量

    AE0503 料仓料位的测量

    With Dimetix laser distance sensors, the level in silos can be measured exactly and at any time. The Dimetix sensors measure on different surfaces like stones, sand, grain or dark surfaces.
    AE1102 钢铁液位(填充和倾倒)控制

    AE1102 钢铁液位(填充和倾倒)控制

    Dimetix sensors were installed in a foundry to monitor the filling of hot steel and iron. With the aid of the sensors the level can be measured and an overflow can be avoided.
  • AN2001 数字显示

    AN2001 数字显示

    This application note shows how to display a measured distance value on a standard external numeric digital display. Description of the wiring and sensor configuration are included as well as two samples are given.

    AN2002 SSI接口用法

    AN2002 SSI接口用法

    SSI is a widely used serial interface standard for industrial applications between a master (e.g. controller) and a slave (e.g. laser distnace sensor). On an SSI communication channel, the master generates a clock, while the slave sends the data corresponding to the received clock signal. Only point to point communication is possible with the SSI interface. The RS-422 standard defines the electrical signal levels of the SSI interface.

    AN2003 RS-422 连接到RS-485

    AN2003 RS-422 连接到RS-485

    This document explains how to connect the RS-422 interface of the laser distnace senor to a RS485 two wire interface. This application note requires special skils, therefore it must be requested by e-mail.
    AN2004 EXCEL示例

    AN2004 EXCEL示例

    This application note describes how to control a Dimetix distance sensor connected to a serial interface by VBA (Visual Basic for Application). The VBA program is integrated into an EXCEL worksheet.
    AN2005 S7 S7 Profibus连接示例

    AN2005 S7 S7 Profibus连接示例

    This application notes describe the connection of the DIMS Profibus converter to a S7 PLC and a Dimetix laser distance sensor. The S7 sample project is also available for download on our web site.

    See also: 500214 DIMS Profibus external Interface
    AN2006 定时测量特性示例

    AN2006 定时测量特性示例

    The Laser distance sensor offers configuration possibilities for fix timed measurements. This application note gives some configuration examples and describe the specialities of the timed measurement characteristic.
    AN2007 附加测量过滤-距离跳变检测

    AN2007 附加测量过滤-距离跳变检测

    The D-Series laser distance sensors provide a wide range of configuration possibilities. This document shows how to configure the distance jump detection feature. This feature works like a plausibility check of the measured distance. A typical use cases can be positioning applications e.g. in the logistics.
    AN2010 通过RS422连接S7

    AN2010 通过RS422连接S7

    This application notes describe how to connect a laser distance sensor to a CP340 interface of a Siemens S7 PLC. The configuration and the wiring is described. In addition to this application note an example for the S7 is also available on our website.
    AN2018 通过RS422测量移动目标的特性

    AN2018 通过RS422测量移动目标的特性

    The "Moving target characteristic" is made for fast position measuring on continuous moving targets. This document describes the necessary settings of the laser distance sensor for the "Moving target characteristic" as well as the configuration of the RS-422 interface.
    AN2019 通过SSI测量移动目标的特性

    AN2019 通过SSI测量移动目标的特性

    The "Moving target characteristic" is made for fast position measuring on continuous moving targets. This document describes the necessary settings of the laser distnace sensor for the "Moving target characteristic" as well as the configuration of the SSI and Analog interface.
    AN2020 用SEW驱动定位

    AN2020 用SEW驱动定位

    This document describes how to use the FLS-C sensor in a positioning application in conjunction with a SEW servo drive. The necessary configuration of the FLS-C and the configuration of the SEW inverter are described . Further the wiring is also documented.
    AN2040 Profinet入门

    AN2040 Profinet入门

    A simple example of use to get started with the PROFINET® interface of the Dimetix D-Series laser distance sensors. All information and instructions necessary to understand this example of use and to run it on a Siemens SIMATIC S7 PLC are included.
    AN2041 EtherNetIP 入门

    AN2041 EtherNetIP 入门

    A simple example of use to get started with the EtherNet/IP™ interface of the Dimetix D-Series laser distance sensors. All information and instructions necessary to understand this example of use and to run it on an Allen Bradley CompactLogix PLC are included.
    AN2042 EtherCat入门

    AN2042 EtherCat入门

    A simple example of use to get started with the EtherCAT® interface of the Dimetix D-Series laser distance sensors. All information and instructions necessary to understand this example of use and to run it on a Beckhoff EtherCAT® master PLC are included.
磁致伸缩位移传感器店铺二维码磁致伸缩液位传感器店铺二维码
磁致伸缩位移传感器logo图片
山东省烟台经济技术开发区珠江路32号3号楼
Copyright © 2019 NADO | All right reserved.
网站地图